Water guidance, without borders

Know your water.
Make sense of the numbers.

Find a city estimate or enter a measured value, convert its units, and match the result to your appliance manual.

Free No sign-up Global units

69 cities currently covered · Use a test result for any location

Water hardness by city · Methodology

Popular lookups
Three simple steps

From tap to dial in seconds

01

Find your supply

Search our curated global city catalogue or enter a reading from your own test strip.

02

Translate every unit

We convert ppm into the units used by appliance manuals around the world.

03

Set it correctly

Get practical salt, detergent, filter and descaling guidance for your hardness band.

Appliance guides

Make sense of your water before changing a setting

A city figure describes a supply area, while an appliance needs a reading that represents the water entering it. Start with the published source and its sampling period, then check whether your address belongs to that supply zone. A home softener can change the reading again.

Our guides explain how to use the numbers, compare a reading with your model’s manual and recognise when more information is needed. They include worked examples and links to the underlying sources. A conversion is useful arithmetic; it cannot establish whether water is safe to drink or prescribe a universal maintenance interval.

Explore all guides →

Check what the source actually measured

Every city record links to its source and identifies the scope of the estimate. Read the data basis before choosing a setting: a published average, a midpoint calculated from a range and an average of several supply zones describe different evidence. A last-checked date tells you when we reviewed a source, while the sampling period tells you when the underlying measurements were taken.

For example, a hypothetical range of 40–160 mg/L has a midpoint of 100 mg/L, but that does not mean most homes receive 100 mg/L. Keep the range when comparing the result with your appliance table. If the endpoints land in different rows, a current measurement from the relevant tap can help. If the source lists only one value, that does not prove every address receives identical water.

A worked example

From a water report to an appliance setting

A report showing 100 mg/L as CaCO₃ converts to about 5.60 °dH or 5.84 grains per US gallon. Find that number in your model’s hardness table; the word “soft” or “hard” alone is not a machine setting.

Use total hardness, not a TDS-meter reading. If your local range crosses two settings, check a fresh tap sample and follow the manufacturer’s instructions for boundary values.

Read the step-by-step guide → Dishwasher settings by brand →
Built for trust

A useful estimate,
not false precision.

Water hardness can change by supply zone, source blend and season. Waterdial shows ranges, confidence and provenance—not a suspiciously exact number.

  • Common global unit conversions
  • Utility or government sources
  • Manual readings override estimates